| 1. Measure, adding 4 spirals (2 for each side) for the flanging. |
| |
| 2. Cut the pipe, by using the pipe cutter. |
| |
3. Tighten the pipe in the template, counting 2 spirals (insert the nuts with the threading outwards)
|
| |
| 4. Insert the template in the flanging device. |
| |
| 5. Press down the flanging device firmly, with compression and outward movement. |
| |
6. Remove the template and check that the 2 spirals are perfectly plane.
Repeat the operation on the other side of the pipe. |
| |
7. Once the flanging operation is ended, apply the gaskets and shape the pipe as required.
|
| |
